High Pressure 5 Gallon Bottle Washing Machine

The high-pressure internal and external washing machine can clean the moss inside the recycled empty bottle. By using a high-pressure pump, water is sprayed out from the high-pressure nozzle, producing a certain amount of high pressure, up to 80-120 bar. The water is sprayed out in a circular shape, equivalent to a 360 degree circular water knife, which can easily remove debris, moss, and other debris on the inner wall and bottom of the empty bottle. During the entire cleaning process, the empty bottle rotates continuously 360 degrees around the center of the empty bottle with the rotating device. At the same time, the high-pressure nozzle moves up and down in a straight line, which can make the high-pressure water sprayed come into contact with every corner inside the empty bottle. For users who produce bottled mineral water and recycle a large amount of moss inside the empty bottle, it is highly recommended to use this internal high-pressure flushing machine.

During the cleaning process, the bottle mouth is facing downwards, and the high-pressure water sprayed by the water knife is used to flush the interior of the empty bottle, effectively removing the moss adhering to the inner wall of the empty bottle. Many manufacturers of mineral water and mountain spring water have mineral trace elements in their water sources, which are not cleaned for a long time. Coupled with light exposure, moss can quickly grow, which troubles many users of bottled water. Manual cleaning is too troublesome and cannot be removed with a brush. After continuous exploration, we have introduced this internal high-pressure flushing machine, which can spray water pressure of 80-120 bars, easily removing moss without damaging the inner wall of the empty bottle.

The cleaning of the interior, exterior, and bottom of the empty bottle is crucial. We recommend a high-pressure brush cleaning machine for the interior and exterior to solve the problem of hair falling from the brush into the interior of the empty bottle. The inner brush head is connected to a high-pressure flushing pump, and the water pressure sprayed out is very high, which can directly flush the dirt attached to the inner wall to achieve the purpose of internal cleaning. The external brush is relatively easier to use, and a higher hardness brush can be directly used to forcefully rub and scrub the external surface and the bottom of the empty bottle to remove pollutants.

The machine speed can be made from 150BPH to 1200BPH. For more information, please contact us freely.